Andover Continuum Remote Communication Configuration Guide , Schneider Electric All Rights Reserved No part of this publication may be reproduced, read or stored in a retrieval system, or transmitted,. Choose Apply Only or Apply and Save to validate the changes. When serial port stops data transmission for a defined period of time Idle Timeout , the connection will be closed and the port will be freed and re-try for connection with other hosts. With the event warning, administrator will be notified if there is a change of the status on the field, thus, take the corresponding action within a short time. User’s Manual Ethernet Interface Rev. You can define max.

Uploader: Vunos
Date Added: 1 March 2006
File Size: 62.7 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 37124
Price: Free* [*Free Regsitration Required]

JetPort Archives – Industrial Networking Solutions – Industrial Ethernet Switches and Routers

The Ethernet More information. JetPort supports sending notification to max. With the event warning, administrator will be notified if there is a change of the status on the field, thus, take the corresponding action within a short time. After configuring the serial setting of the ports, the serial tunnel will be built by assigning one port as the TCP Server mode and the other as the TCP Client mode.


Remark the port to hint the connected device. Go to the port of the device in Configuration tree. You can modify Device Name and remark Location information.

JetPort 5201 Overview

Power 1 is korneix. In Throughput mode, the throughput is high. Zero is disable this setting default. Choose Apply Only or Apply and Save.

To use the features described in this chapter, log in to the modem router More information. Jetlort Commander is an easy-to-use utility with auto device discovery jdtport a LAN or adding devices on the public network. Specify the IP and port number of the host. When DSR Data Set Ready signal changes, indicating that the data communication equipment is powered off, the event will be triggered.

When rebooting the device, the changes are still valid. The length of Location and Contact information is from 0 towhich is optional.

Select the available port number to map to. User s Manual The software described in this manual is furnished under a license agreement and may be. Please check Disk utility section in this manual. User Kprenix Network Interface Rev. Note that okrenix the hosts for the multiple TCP Server connections must have the same serial parameters to communicate with JetPort, i. If Multilink is configured, only the first host connection is effective for this setting.


Box — Ottawa, IL Other marks are trademarks of their respective owners. The above security settings should be the same in your access point AP and JetPort.

If you assign password, you will need to give password every time when you access Windows, Web, or Telnet consoles. Select the available port number to map to. Hardware Reset Cold Start: When the connection is built, the data is transmitted bi-directionally. After increasing the max.


Zero means disable factory default. Ietport Power 1 and Power 2 are activated. The Dual Power display function is applied to JetPort and f. The Virtual COM ports on the network can also be shared by multiple hosts.

Ethernet port 1 and port 2 are linked, Port 1 is the master port.